Hamiltonian cycles in polyhedral maps

We present a necessary and sufficient condition for existence of a contractible, non-separating and non-contractible separating Hamiltonian cycle in the edge graph of polyhedral maps on surfaces. We also present algorithms to construct such cycles whenever it exists where one of them is linear time and another is exponential time algorithm.     

Synthesis,Structures, and Fungitoxicity of Novel Organophosphorus Compounds

Abstract

A series of biologically active organophosphorus compounds have been synthesized by the reactions of O,O-diethylchlorophosphate with Schiff bases derived from 5-(phenyl/substituted phenyl)-2-hydrazino-1,3,4-oxadiazole and salicylaldehyde/2-hydroxyacetophenone. The compounds have been characterized on the basis of analyses and spectral (IR, ¹H, ¹³C NMR) data. Fungicidal activities of these derivatives against Colletotrichum falcatum, Fusarium oxysporum, and Curvularia pallescence have been evaluated. All compounds showed moderate to significant antifungal activity.     

Macroscopic recognition of iodide by polymer appended calix[4]amidocrown resin

ABSTRACT

The current study reveals the synthesis of polymer appended Calix[4]amidocrown-5 with specific binding affinity for iodide at ppm-level. The low detection limits are observed via UV-vis and fluorescence spectroscopy. The time-dependent solution and solid-state ¹²⁷I NMR studies with 18.8 and 19 ppm shifts, indicate a strong sensing nature of resin towards iodide ion. A significant reduction in surface area and pore volume with higher thermostability of resin after iodide uptake indicated iodide inclusion in the amidocrown cavity. The mechanism of iodide sensing may be governed by noncovalent interactions of NH and OH protons present in amidocrown and phenyl ring as observed in terms of emission enhancement in fluorescence spectroscopy. The binding affinity and stoichiometric determinations are determined by Benesi-Hildebrand and Jobs plots, respectively.     

Molecular Modeling and 3D-QSAR Studies in 2-Aziridinyl-and 2,3-Bis(Aziridinyl)-1,4-Naphthoquinonyl Sulfonate and Acylate Derivatives as Potential Antimalarial Agents

Abstract

Malaria is still continuing to be one of the most dreadful diseases of the tropical countries particularly due to the development of resistance to the existing antimalarials. From observed, antimalarial activity of 2-aziridinyl- and 2,3-bis(aziridinyl)-1,4-naphthoquinonyl sulfonate and acylate derivatives acting through redox cycling mechanism, molecular modeling and three dimensional-quantitative structure activity relationship (3D-QSAR) studies have been carried out on a set of 63 compounds to identify important pharmacophors. Among several 3D-QSAR models generated, three models with correlation coefficient r > 0.82, match > 0.60 and chance = 0.00 have shown two common biophoric sites: one being the oxygen atom at position 1 of the naphthoquinone ring in terms of π-population, charge and electron donating ability while the second being the center of the phenyl ring in terms of its 6π-electrons. In addition to these sites, the models also share two common secondary sites: one positively contributing H-acceptor site while the second site contributing negatively in terms of steric refractivity. All these models showed good agreement between the experimental, calculated and predicted antimalarial activities.     

Experimental study and performance evaluation of various cook stove models based on energy and exergy analysis

This article presents the experimental study and comparative performance evaluation of four types of cook stoves using energy and exergy analysis. Analysis of four different types of cook stove models viz. Envirofit, Mangla, Harsha and Vikram were selected and the water boiling test has been carried out. The suitable biomass available from the local market was prepared in the proper size as described in the Bureau of Indian Standards (BIS) and has been used as the fuel for cook stove in this experimental study. The aluminium pots of proper capacity as per BIS standard have been used for different cook stoves. The data from the experiments was collected and evaluated for the energy and exergy efficiencies for different models. Based on the data analysis it is found that the exergy efficiency is much lower than that of the energy efficiency for all the four models. It is also found that the both the efficiencies of Envirofit model are found to be higher than those of other models studied here.     

Thermodynamic investigation on M–Te–O (M = Sc, Y) system

The standard Gibbs energy of formation of M₂TeO₆ and M₆TeO₁₂ (where M = Sc, Y), was determined from its vapor pressure measurements by employing thermogravimetry-based transpiration technique. This technique was validated by measuring the vapor pressure of well-studied substances such as TeO₂(s) and CdCl₂(s). The temperature dependence of the vapor pressure of TeO₂(g) over the mixtures M₆TeO₁₂ + M₂O₃ (where M = Sc, Y), generated by the incongruent vaporization reaction, M₆TeO₁₂(s) → 3M₂O₃(s) + TeO₂(g) + ½O₂(g) were measured in the temperature range 1,413–1,473 K and 1,623–1,743 K for Sc₆TeO₁₂(s) and Y₆TeO₁₂(s), respectively. Similarly, the vapor pressure of TeO₂(g) over the mixtures M₂TeO₆(s) + M₆TeO₁₂(s) generated by the vaporization reaction, 3M₂TeO₆(s) → M₆TeO₁₂(s) + 2TeO₂(g) + O₂(g) was measured in the temperature range (1,223–1,293 K) and (1,333–1,423 K) for Sc₂TeO₆(s) and Y₂TeO₆(s), respectively. From the vapor pressure measurements, the standard Gibbs energy of formation of M₆TeO₁₂ and M₂TeO₆ were derived.     

Fabrication and characterization of electrochemical double layer capacitors using ionic liquid-based gel polymer electrolyte with chemically treated activated charcoal electrodes

The present investigation deals with electrochemical double layer capacitors (EDLCs) made up of ionic liquid (IL)-based gel polymer electrolytes with chemically treated activated charcoal electrodes. The gel polymer electrolyte comprising of poly(vinylidine fluoride-co-hexafluropropylene) (PVdF-HFP)–1-ethyl-2,3-dimethyl-imidazolium-tetrafluroborate [EDiMIM][BF₄]–propylene carbonate (PC)–magnesium perchlorate (Mg(ClO₄)₂) exhibits the highest ionic conductivity of ~8.4?×?10^?3?S?cm^?1 at room temperature (~20 °C), showing good mechanical and dimensional stability, suitable for their application in EDLCs. Activation of charcoal was done by impregnation method using potassium hydroxide (KOH) as activating agent. Brunauer–Emmett–Teller (BET) studies reveal that the effective surface area of treated activated charcoal powder (1,515 m²?g^?1) increases by more than double-fold compared to the untreated one (721 m²?g^?1). Performance of EDLCs has been tested using cyclic voltammetry, impedance spectroscopy, and charge–discharge techniques. Analysis shows that chemically treated activated charcoal electrodes have almost triple times more capacitance values as compared to the untreated one.     

Adsorption and Equilibrium Isotherm Study of Removal of Copper (II) Ions from Aqueous Solution by Chemically Modified Abelmoschus esculentus Fibers

The present study explores surface modification of Abelmoschus esculentus by graft copolymerization reaction using acrylonitrile as a monomer and ascorbic acid/H₂O₂ as a redox initiator. Further, polyacrylonitrile grafted fibers were treated with hydroxylamine to convert the nitrile group of the grafted fiber into the amidoxime group to enhance adsorption of copper ions from wastewater. The graft copolymers and amidoximated fibers were characterized by FT-IR and FE-SEM. The effects of physicochemical parameters such as pH of the solution, initial metal ion concentration, and time on Cu(II) adsorption were studied to optimize condition for maximum adsorption. In addition, Langmuir, Freundlich, and Tempkin models were applied to describe the adsorption isotherm of Cu²⁺ ions.     

A Convenient Synthetic Entry Into 2,2-Diorganyl-5,6-Diaryl-1,3,4,2-Dioxaza Silacyclohexene Derivatives VIA Dianion Cyclisation: Sequential One-Pot Cyclosylation

In a convenient one-pot sequence, treatment of bezoin and p-anisoin oximes with sodium hydride in dry THF in 1:2 molar ratio generates 1,5-dianion, which upon subsequent addition of diorganodichlorosilane yields 1,3,4,2-dioxazasilacyclohexene derivatives in good yields. In general, very often a salt elimination route is used for the synthesis of the title compounds.     

Cyclizations of Some Terminally Substituted a,c-Biladienes

Several examples of 1′,8′-disubstituted a,c-biladiene salt cyclizations, using copper(II) or iodine/bromine in hot o-dichlorobenzene, to give meso-substituted porphyrins are described.